6” x 4” x 1/4" Wall Extendable Tongue with Lubricated Steel Wear Pads
6-Position Adjustable Hitch Plate
2 1/2" Lunette Eye, 35,000 lbs. Capacity
3/8” x 36”L Galvanized Safety Chains with Safety Hooks and Anchor Shackles
8” x 4” x 1/4" Wall Extendable Tongue with Lubricated Steel Wear Pads
6-Position Adjustable Hitch Plate
2 1/2" Lunette Eye, 35,000 lbs. Capacity
3/8” x 36”L Galvanized Safety Chains with Safety Hooks and Anchor Shackles
A FRAME & JACK
6” x 2” Tubular Steel A-Frame
Fixed Binkley, Model 48000 Drop Leg Jack, 12,000 lb. Static Load Capacity
MAIN FRAME
6” x 3” Tubular Steel Main Frame
8” x 6” Receiver Tube
7” x 3“ Tubular Steel Crossmembers Under Center and Rear Bolsters
3” Structural C-Channel Crossmembers on 14 1/2” Centers Under Cargo Bed Floor
6” x 3” Tubular Steel Main Frame
10” x 6” Receiver Tube
7” x 3“ Tubular Steel Crossmembers Under Center and Rear Bolsters
3” Structural C-Channel Crossmembers on 14 1/2” Centers Under Cargo Bed Floor
CARGO BED
Interior Dimensions: 142"L x 64”W x 15”H with Reinforced Fold Down Tailgate
Floor: 1/8” Smooth Steel Construction
Sidewalls: 12 Gauge Formed in Brake for Added Strength
Tailgate: Tubular Construction, w/ Offset Hinges so Debris is Easily Cleared
(4) four - 5/8” D-Rings, 9000 lbs. Capacity each, Floor Mounted (1) one each Corner
FENDERS & CATWALK
Fabricated 1/8” Steel Diamond Tread Plate Fender Construction
(4) four - Roll-Off Fender Guards, Prevents Damage to Fenders when “Wrecking”
TOOLBOXES
Tool Box Dimensions: 14”H x 14”D x 64”W
Fabricated 1/8” Smooth Steel Integrated Construction
(2) Side Entry Doors Key Locked with Twist Latches
Weather Tight Rubber Gaskets
Tool Box Dimensions: 14”W x 24”D x 64”W
Fabricated from 1/8” Smooth Steel Integrated Construction
(2) Side Entry Doors Key Locked with Twist Latches
Weather Tight Rubber Gaskets
12 VOLT
WIRING SYSTEM
ICC & DOT Approved Lights
Sealed Beam Rubber Mounted Stop, Turn, Tail and Marker Lights
S.O. Cable Wiring Loom, Clamped on 16” Centers with Rubber Lined Clamps
Wiring Loom Terminated in Junction Boxes
Connections Soldered and Sealed with Heat Shrink Tubing
Stretch Coil Cord with Retainer on Extendable Tongue
32” Pigtail w/ 6-Way Aluminum Die Cast Plug, Terminated at Junction Box
6-Way Aluminum Die Cast Plug (Truck Side) in Rear Butt Tube for Light Bar Hook-Up
Breakaway Kit with Sealed Lead Acid Battery and Trickle Charger
PAINT
Trailer is Completely Sandblasted
Seams are Sealed with Paintable Caulk
Rust Prohibitive Two-Part Epoxy Polyamide Primer
Two-Part Acrylic Polyurethane Topcoats (Standard Colors Black and White)
All Attachments Painted before Assembly and Installed with Serviceable Fasteners
Options
AXLES
7000 lb. Tandem – Payload: 12,000 lbs. GVWR 15,000 lbs.
12” x 2” Electric Brakes
(4) four - ST235/80R16 LR-E, (14 Ply) Capacity 3,520 lbs.
8000 lb. Tandem – Payload: 13,500 lbs. GVWR 16,500 lbs.
12 1/4" x 3 3/8” Electric Brakes(4) four - 215/75R/17.5 LR-H, Capacity 4,805 lbs.
OPTIONAL SPARE TIRE & WHEEL
LT235/85R16 LR-E (6K Axle)
ST235/80R16 LR-E (7K Axle)
215/75R/17.5 LR-H (8K Axle)
Rubber Wheel Chocks (7”H x 10”L x 8”W) pair
FRONT BOLSTER OPTIONS
(MOUNTED ON EXTENDABLE TONGUE)
64”W Tubular Bolster,
Pole Stops, Winch Binder and Nylon Strap (In Lieu of 45” Front Bolster)
U-Type Single Pole Cradle
Winch Binder and Nylon Strap (In Lieu of 45” Front Bolster)
60”W (45” ID) 3” Double C-Channel Bolster,
Winch Binder and Nylon Strap (In Lieu of 45” Front Bolster):
with 9” Chain Adjusted Stanchions or 21” Lever Lock Stanchions
(4) - 30' L Nylon Winch Strap in Lieu of 15'
REMOVABLE REEL RACK OPTIONS
(1) pair - 36”H Reel Stands with 3” Receivers Tubes
(Reel Bar Not Included)
Additional (1) pair – 3” Receiver Tubes Only
2 7/8” Reel Bar with (2) Locking Collars
Standard Reel Rack Package
(1) pair - 36”H Reel Stands
(1) pair – 3” Receiver Tubes
(1) 2 7/8” Reel Bar with (2) Locking Collars
Maximum Reel Size - 68”D x 50”W x 2,200 lbs. Capacity
Reel Rack with HD Bronze Bushings Package
(1) pair - 36”H Reel Stands with Bronze Bushings
(1) pair – 3” Receiver Tubes
(1) 2 7/8” Reel Bar with (1) Crossarm and (1) Locking Collar
Maximum Reel Size – 68”D x 50”W x 2,500 lbs. Capacity
REMOVABLE BOLSTERS
(CENTER & REAR)
89” W Removable 3” Double C-Channel Bolsters
Includes Your Choice of Stanchions:
with 9” Chain Adjusted Stanchions
with 21” Lever Lock Adjusted Stanchions
REEL RACKS WITH OVERSPIN / TENSIONING BRAKES
8” Overspin Brake Package
8” Brake w/ 8” x 7/16” Solid Stainless Steel Disc, Cast Aluminum Caliper and Tension Adjusting Handle
(1) pair - 36”H Reel Stands with Bronze Bushings
(1) 2 7/8” Reel Bar with (1) Crossarm and (1) Locking Collar
Maximum Reel Size 68”D x 48”W x 2,500 lbs
12” Medium Duty Tensioning Brake Package
12” Tension Brake w/ 12” x 5/8” Solid Bronze Disc, Cast Steel Caliper and Tension Adjusting Handle
(1) pair - 36”H Reel Stands with Heavy Duty Bronze Bearings
(1) 2 7/8” Reel Bar with (1) Crossarm and (1) Locking Collar
Maximum Reel Size 68”D x 48”W x 3,500 lbs
HITCH & JACK
3” Lunette Eye (In Lieu of 2 1/2" Eye)
Visible Registration Holder
Jack Handle Extension:
Add to One Side
Add to Both Sides (Requires Store-Away Handle)
CARGO BED
(4) - 9” Wide x 9” Deep Open Top Storage Bins
Located Front and Rear of Fenders to Roll-Off Fender Guards
Additional D-Rings
Chains on Tailgate
WIRING & LIGHT BAR
Light Bar
(2) Rubber Mounted Sealed Beam Lights (Stop Turn and Tail)
36”L x 4" x 4" Tubular Steel Body
Chain Adjusted Mounting Base
25’ of Cable with 6-Way Aluminum Die Cast Connector
Warner 6-Way Connector
in Lieu of Standard 6-Way Connector
Solar Charged Breakaway Kit In Lieu of Standard Kit
Adobe Reader required to view brochure. Left-click to view with your browser.
Right-click to download the file to your hard drive.
Home
Contact Us 
Bucket Trucks
Cranes
Digger Derricks
Dump Bodies
Lift Gates
Platform Lifts
Sign Cranes
Tracked Vehicles
Trailers
Truck Bodies
Used Equipment 
Rental / Leasing
Repair / Testing
Training
Paint Shop
Parts
Online Store
Contact Us
Financing
About Us
Directions/Travel
Employment
Industry News
Useful Links
(1) pair - 36”H Reel Stands with 3” Receivers Tubes
(Reel Bar Not Included) 
