(4) four - 16” x 6” Wheels (8 Hole on 6 1/2" Bolt Circle)
Pair - Mud Flaps
POLE BOLSTERS
Front Bolster: 45”W Fixed (Mounted on Extendable Tongue)
Center Bolster: 95”W Fixed 5” Double C-Channel Construction with 21” Stanchions
Rear Bolster: 95”W Fixed 5” Double C-Channel Construction with 21” Stanchions
Stanchions: (4) four - 21” Lever Lock, Sliding & Removable
(4) four - Heavy Duty Ratchet Type Winch Binders with Breaker Bar
(4) four - 15’ L x 4” W x 12000 lbs. Nylon Straps
TONGUE & HITCH
8” x 4 ” x 1/4" Wall Extendable Tongue with Lubricated Steel Wear Pads
6-Position Adjustable Hitch Plate
2 1/2" Lunette Eye, 35000 lbs. Capacity
3/8” x 36”L Galvanized Safety Chains with Safety Hook and Anchor Shackle
A FRAME & JACK
7” Structural C-Channel A-Frame
Fixed Binkley, Model 48000 Drop Leg Jack, 12,000 lb. Static Load Capacity
MAIN FRAME
7” x 4” Tubular Steel Frame
10 ” x 6 ” Receiver Tube
7” x 4 “ Tubular Steel Crossmembers Under Rear Bolster
3” Structural C-Channel Crossmembers
FENDERS
Fabricated 1/8” Steel Diamond Tread Plate Fender Construction
Reinforced with 3” Structural C-Channel at Front and Rear of Fender
12 VOLT
WIRING SYSTEM
ICC & DOT Approved Lights
Sealed Beam Rubber Mounted Stop, Turn, Tail and Marker Lights
S.O. Cable Wiring Loom, Clamped on 16” Centers with Rubber Lined Clamps
Wiring Loom Terminated in Junction Boxes
Connections Soldered and Sealed with Heat Shrink Tubing
Stretch Coil Cord with Retainer on Extendible Tongue
32” Pigtail w/ 6-Way Aluminum Die Cast Plug, Terminated at Junction Box
6-Way Aluminum Die Cast Plug (Truck Side) in Rear Butt Tube for Light Bar Hook-Up
Breakaway Kit with Sealed Lead Acid Battery and Trickle Charger
PAINT
Trailer is Completely Sandblasted
Seams are Sealed with Paintable Caulk
Rust Prohibitive Two-Part Epoxy Polyamide Primer
Two-Part Acrylic Polyurethane Topcoats (Standard Colors Black and White)
All Attachments Painted before Assembly and Installed with Serviceable Fasteners
2” Red/White Reflective Tape on Both Sides of Trailer
Options
AXLES WITH ELECTRIC BRAKES OPTIONS
10000 lbs. GD – Payload: 8,700 lbs. GVWR 11,700 lbs.
8 Stud Oil Bath Hubs
12 1/4" x 3 3/8” Electric Brakes
(4) four - LT235/85R16 LR-E Tires, Capacity 2,778 lbs. each
(4) four - 8 Hole Dual Wheels
10000 lbs. HD – Payload: 8,700 lbs. GVWR 11,700 lbs.
8 Stud Oil Bath Hubs
12 1/4" x 4” Electric Brakes
(4) four - LT235/85R16 LR-E Tires, Capacity 2,778 lbs. each
(4) four - 8 Hole Dual Wheels
12000 lbs. – Payload: 11,000 lbs. GVWR 14,100 lbs.
8 Stud Oil Bath Hubs
12 1/4" x 5” Electric Brakes
(4) four - ST235/80R16 LR-E Tires, (14 Ply) Capacity 3,100 lbs. each
(4) four - 8 Hole Dual Wheels
15000 lbs. – Payload: 14,000 lbs. GVWR 17,500 lbs.
10 Stud Oil Bath Hubs
12 1/4" x 5” Electric Brakes
(4) four – 215/75R/17.5 LR-H Tires, Capacity 4,540 lbs. each
(4) four - 10 Hole Dual Wheels.
AXLES WITH ABS AIR BRAKES OPTIONS
10000 lbs. HD w/ ABS – Payload: 8,700 lbs. GVWR 11,700 lbs.
8 Stud Oil Bath Hubs
12 1/4" x 4” Spring Brakes, Auto Slack Adjusters
(4) four - LT235/85R16 LR-E Tires, Capacity 2,778 lbs. each
(4) four - 8 Hole Dual Wheels
12000 lbs. w/ ABS – Payload: 11,000 lbs. GVWR 14,100 lbs.
8 Stud Oil Bath Hubs
12 1/4" x 5” Spring Brakes, Auto Slack Adjusters
(4) four - ST235/80R16 LR-E Tires, (14 Ply) Capacity 3,100 lbs. each
(4) four - 8 Hole Dual Wheels
15000 lbs. w/ ABS – Payload: 14,000 lbs. GVWR 17,500 lbs.
10 Stud Oil Bath Hubs
12 1/4" x 5” Spring Brakes, Auto Slack Adjusters
(4) four – 215/75R/17.5 LR-H Tires, Capacity 4,540 lbs. each
(4) four - 10 Hole Dual Wheels
OPTIONAL SPARE TIRE & WHEEL
LT235/85R16 LR-E (9 & 10K Axle)
ST235/80R16 LR-E (12K Axle)
215/75R/17.5 LR-H (15K Axle)
Wheel Chock Holders, with 7”H x 10”L x 8”W Rubber Wheel Chocks
BOLSTER OPTIONS
64”W Tubular Front Bolster on Extendable Tongue,
Pole Stops, Winch Binder and Nylon Strap (In Lieu of 45” Front Bolster)
U-Type Single Pole Cradle on Extendable Tongue
Winch Binder and Nylon Strap (In Lieu of 45” Front Bolster)
60”W (45” ID) 3” Double C-Channel Bolster,
Winch Binder and Nylon Strap (In Lieu of 45” Front Bolster):
with 9” Chain Adjusted Stanchions or 21” Lever Lock Stanchions
(4) - 30' L Nylon Winch Strap in Lieu of 15'
(4) four - 9” Chain Adjusted Stanchions,
Installed on Center & Rear Bolster In Lieu of 21” Lever Lock Stanchions
HITCH & JACK
3” Lunette Eye (In Lieu of 2 1/2" Eye)
Visible Registration Holder
Jack Handle Extension:
Add to One Side
Add to Both Sides (Requires Store-Away Handle)
CARGO BED
Add 118 ”L x 39”W x 7”H Cargo Bed Floor Between Center and Rear Bolster Expanded Metal Floor or 1/8” Smooth Metal Floor
Additional D-Rings
Tool Box 15” Long x 12 1/4" Wide x 10” Deep Mounted in Front of Fender
WIRING & LIGHT BAR
Light Bar
(2) Rubber Mounted Sealed Beam Lights (Stop Turn and Tail)
36”L x 4" x 4" Tubular Steel Body
Chain Adjusted Mounting Base
25’ of Cable with 6-Way Aluminum Die Cast Connector
Warner 6-Way Connector
in Lieu of Standard 6-Way Connector
Solar Charged Breakaway Kit In Lieu of Standard Kit
Adobe Reader required to view brochure. Left-click to view with your browser.
Right-click to download the file to your hard drive.
Home
Contact Us 
Bucket Trucks
Cranes
Digger Derricks
Dump Bodies
Lift Gates
Platform Lifts
Sign Cranes
Tracked Vehicles
Trailers
Truck Bodies
Used Equipment 
Rental / Leasing
Repair / Testing
Training
Paint Shop
Parts
Online Store
Contact Us
Financing
About Us
Directions/Travel
Employment
Industry News
Useful Links
