Choose Your Language
Versalift East - Bucket Trucks and Aerial Lifts
Welcome to Versalift East - Bucket Trucks and Aerial Lift Trucks
Search the Versalift East Website for:
  Versalift Bucket Trucks

Condor CTA-104-I Articulated / Telescopic Insulated
Aerial Work Platforms

UPPER BOOM ASSEMBLY Condor Work Platform
The upper boom is a two-section telescoping type consisting of a sealed telescoping insulated inner boom with articulation ranging up to 168° relative to the lower boom. All lift functions are icroprocessor controlled for smooth, dependableoperation and safety.

LOWER BOOM ASSEMBLY
The lower boom is a two-section telescopic type consisting ofan inner and outer column and can articulate 85° from thehorizontal. The boom is constructed of high strength tubularwelded reinforced steel, along with a fiberglass insert, designedto provide maximum strength and rigidity.

PLATFORM
The standard fiberglass platform on the CTA-104-I is 48 in. x24 in. x 42 in. (1.22 m x .61 m x 1.67 m). The platform isequipped with a 180° platform rotation independent of turretrotation. Standard platform capacity is 800 lbs. (360 kg). Theunit is rated for 500 KV category A ANSI A92.2-2001.

JIB AND WINCH
The 1,500 lbs. hydraulic platform jib and heavy-duty winchrotate up to 180° both with the platform and independently forprecise load positioning. This assembly facilitates easy lifting, handling and load maneuvering. The jib and winch can bestored when not in use to provide more operator and equip-ment space.

Aerial LiftCondor Trucks

SHORT JACKING
The short jacking capability allows for the lift to operate overone side of the truck without requiring the operator to fullyextend the out and down outriggers on the opposite side. Withthe combination of our “out and down” style outriggers and theelectronic boom rotation system, work can be performed overthe curb-side with no necessary outrigger extension on thestreet-side. Condor CTA104IThe electronic boom rotation system will not al-low the boom to rotate to the street-side. These features com-bine for tremendous space-saving and a safe work environ-ment for otherwise tight or crowded areas.

ROTATION
Rotation on the CTA-104-I is 360° continuous and unrestrictedin either direction and consists of a planetary gearbox actingon a shear-ball rotation bearing. The critical bolts holding thelift to the rotation bearing and the rotation bearing to thepedestal are grade 8 hex head capscrews. These critical boltsare torque seal marked to provide a quick means of detectingany turning of the bolt upon inspection.

LUBRICATION
Non-lube bearings are used at all pivot points. Only therotation bearing requires periodic lubrication.

 

General Specifications

Platform Capacity:
800 lbs. (360 kg.)
Working Height:
103 ft. 6 in. (31.6m)
Max. Horizontal Reach:
48 ft. 10 in. (14.66 m)
Elevated Horizontal Reach:
47 ft. 6 in. (14.5 m)
Height to Bottom of Platform:
98 ft. 6 in. (30.02 m)
Upper Boom Articulation:
170°
Lower Boom Elevation:
0° to 85°
Operating Pressure:
3000 PSI (211 kg/cm2)
Voltage Rating:
500 KV
Flow Rate:
0 to 23 GPM
Filtration:
10 micron return
100 mesh suction
Hydraulic System Type:
Closed center
PTO pump

Condor CTA-104
*The CTA-104-I is mounted on a commercial 60,000 GVW tandem axle chassis.

.Recommended chassis requirements:

  • Front axle gross weight20,000 lbs.
  • Rear axle gross weight40,000 lbs.

OPTIONS:

  • PLATFORM LINER
  • METAL PLATFORM
  • PLATFORM COMMUNICATION SYSTEM
  • 3 AXIS JOYSTICK AT UPPER CONTROLS
  • 6 GPM HYDRAULIC TOOL POWER @ PLATFORM

 

 
Utility Equipment Partners