CREATED THE DESIGN
TIME created the concept and introduced the design of the
Versalift SST-37/40 now copied by other aerial lift
manufacturers. That same originality allows us to always be
a step ahead of competitive machines with innovative features
and proven reliability.
The unique and customizable design of the Versalift
SST-37/40 ensures that you receive a quality-engineered
product that meets your industry-specific needs. Each model
can be further customized to include a variety of options that
enhance the overall capabilities of the unit.
DIELECTRIC INTEGRITY (INSULATED UNITS)
Ensuring that dielectric integrity is maintained is a necessity.
Through the use of TIME’s patented “Electrogard” the Versalift
SST-37/40 maintains a 42 inch insulation gap at all times,
allowing you to achieve complete insulation in any boom
position, including fully stowed.
DECREASED INSPECTION TIME
Inspection time is reduced through the effective use of torque
stripe on all critical fasteners. Operators may quickly perform
a visual walk around inspection of the Versalift SST-37/40 prior
to use to determine if all bolts are securely fastened and the
unit is safe for mechanical operation.
ALUMINUM INNER BOOM (NON-INSULATED UNITS)
The Versalift SST-37/40 provides lower overall unit weight and
increased strength with the use of an aluminum inner boom.
Using an aluminum inner boom also aides in minimizing
maintenance and service times.
INCREASED OVERALL REACH AND CAPACITY
The Versalift SST-37/40 offers 27 ft 9 in of horizontal reach, up
to 40 feet of vertical reach and 400 lbs of platform capacity,
allowing you to reach higher and farther than ever before. The
versatility of the SST-37/40 has made it the premier choice for
the telecommunications industry, providing users with the greatest reach capacities available on the market today.
LOWER LIFECYCLE COSTS
There is no mandatory rebuild on the Versalift SST-37/40
because it is designed and built to last. Besides reducing
lifecycle costs in pure dollars and cents, the Versalift
SST-37/40 also gives superior reliability and serviceability over
time.
BUILT-IN SAFETY FEATURES
Safety is always our top priority, so every Versalift
SST-37/40 is equipped with dual pin retention. This redundant
safety feature provides the assurance that all pins stay
securely in position.
GENERAL SPECIFICATIONS (Based on 40 in (1.02m) Frame Height)
SST-37-EIH
SST-40-EIH
SST-37-ENH
SST-37-NE
Maximum Platform Capacity
400 lbs (181kg)
400 lbs (181kg)
400 lbs (181kg)
400 lbs (181kg)
Outer Boom Lift Eye Capacity
500 lbs (227kg)
500 lbs (227kg)
500 lbs (227kg)
500 lbs (227kg)
With Standard Pedestal
Height to Bottom of Platform
37 ft 0 in (11.3m)
40 ft 0 in (12.2m)
37 ft 0 in (11.3m)
37 ft 0 in (11.3m)
Working Height
42 ft 0 in (12.8m)
45 ft 0 in (13.7m)
42 ft 0 in (12.8m)
42 ft 0 in (12.8m)
Stowed Travel Height
10 ft 4 in (3.1m)
10 ft 4 in (3.1m)
10 ft 4 in (3.1m)
10 ft 4 in (3.1m)
Hydraulic System
Operating Pressure
2250 PSI (158 kg/cm2)
Flow Rate
3 GPM (11 lpm)
Filtration
10 micron return
100 mesh suction
System Type
Open center
*NOTE:
Specifications may vary without prior notification
Required GVWR can vary significantly with chassis, lift mountings location, service body, accessories, and desired payload.
OPTIONS:
Ground Access Ability with Increased Outer Boom Articulation
Continuous Rotation
180° Rotating Platform
Larger Platforms & Increased Platform Capacity
Hydraulic Tool Circuit at the Platform
Emergency Power
Two-Speed Throttle Control
Chassis Insulation System (Lower Boom Insert)
Independent Outriggers or Front and Rear Tortion Bars
Shorter or Taller Pedestals
Side by side low stow boom design allows for safer
platform entry and reduced travel height.
Standard features include hydraulic platform tilt for operator
rescue and easy platfomr clean-out
