Versalift VST-5000 / 5500 / 6000 Articulated / Telescopic Aerial
Bucket Trucks with Optional Material Handling
CREATED THE DESIGN
TIME created the concept and introduced the design of
the Versalift VST Series now copied by other
aerial lift manufacturers. That same originality
allows us to always be a step ahead of competitive
machines with innovative features and proven reliability.
The unique and customizable design of the Versalift
VST Series ensures that you receive a quality- engineered
product that meets your industry-specific needs. Each
model can be further customized to include a
variety of options that enhance the overall capabilities
of the unit.
INCREASED OVERALL REACH AND CAPACITY
The Versalift VST-6000 is the only telescopic/
articulated machine on the market that offers
65 feet of working height on a 108 inch CA chassis.
This unique configuration gives you both the height to tackle almost any size pole, and the compactness that
allows you to work in the tightest working areas.
DECREASED INSPECTION TIME
Inspection time is reduced through the effective use
of torque stripe on all critical fasteners. Operators
may quickly perform a visual walk around inspection
of the Versalift VST Series prior to use to determine
if all bolts are securely fastened and the unit
is safe for mechanical operation.
PLATFORM SUPPORT MOUNTED JIB & WINCH
The Versalift VST Series is available with a removable jib &
winch increasing its flexibility and allowing it to be used in a
wide variety of applications. With the platform support mounted
jib and 180º rotator, setup time decreases and productivity
increases as there is less need for accuracy when determining
distance to the work site. Operators can more easily get the
load to the work area. In addition, the platform support mounted
jib is self-leveling which automatically levels the load as the
boom is raised or lowered. The operator is able to focus more
on load placement and less on load leveling.
DIELECTRIC INTEGRITY
Ensuring that dielectric integrity is maintained is a necessity.
The Versalift VST Series maintains a minimum insulation gap
of 38 inches with the fiberglass inner boom fully retracted. This
allows a Category C, 46kV rating with the fiberglass inner boom
in any position, including fully retracted.
The VST-6000 is available with Category B, 69 kV ratings,
increasing it’s flexibility and allowing it to be used in a wider
variety of applications. You save money by having one machine
capable of performing work that most often requires multiple
and different types of units.
LOWER LIFECYCLE COSTS
There is no mandatory rebuild on the Versalift VST Series
because it is designed and built to last. Besides reducing
lifecycle costs in pure dollars and cents, the Versalift VST Series
also gives superior reliability and serviceability over time.
GENERAL SPECIFICATIONS (Based on 40 in. (1.02 m) Frame Height)
VST-5000
VST-5500
VST-6000
Horizontal Reach
36 ft 8in (11.29m)
37 ft 11in (11.6m)
39 ft 3 in (12m)
Maximum Platform Capacity
600 lbs (272kg)
600 lbs (272kg)
600 lbs (272kg)
Lower Boom Lift Eye Capacity
1000 lbs (455kg)
1000 lbs (455kg)
1000 lbs (455kg)
With Standard Pedestal
Height to Bottom of Platform
49 ft 8in (15.1m)
55 ft 3 in (16.8m)
60 ft 1in (18.3m)
Working Height
54 ft 8in (12.5m)
60 ft 3 in (18.4m)
65 ft 1in (19.8m)
Stowed Travel Height
11 ft 11 in (3.6m)
11 ft 11 in (3.6m)
11 ft 11 in (3.6m)
Hydraulic System
Operating Pressure
2250 PSI (158 kg/cm2)
2250 PSI (158 kg/cm2)
2250 PSI (158 kg/cm2)
Flow Rate
7.5 GPM (23 lpm)
7.5 GPM (23 lpm)
7.5 GPM (23 lpm)
Filtration
10 micron return
100 mesh section
10 micron return
100 mesh section
10 micron return
100 mesh section
System Type
Open center
Open center
Open center
Power Source
PTO Pump
PTO Pump
PTO Pump
VST-5000/5500/6000 Platform Travel
*NOTE:
Specifications may vary without prior notification
Required GVWR can vary significantly with chassis, lift mountings location, service body, accessories, and desired payload.
increases as there is less need for accuracy when determining
distance to the work site. Operators can more easily get the
load to the work area. In addition, the platform support mounted
jib is self-leveling which automatically levels the load as the
boom is raised or lowered. The operator is able to focus more
on load placement and less on load leveling.
