Home | Contact Us

Versalift East, Inc. • 2706 Brodhead Road • Bethlehem, PA 18020 • 888-866-1400 or 610-866-1400

Bucket Trucks

Cranes

Digger Derricks

Dump Bodies

Lift Gates

Rental / Leasing

Repair / Testing

Training

Paint Shop

Parts

Online Store

Crysteel Colt Trailer Hoist

Designed and tested specifically for dump trailers, Colt Trailer Hoists offer you a Superior Design. A powder coated frame, double acting cylinders with chrome plated shafts and fully greasable pivot points deliver a trailer hoist with the power, performance, and dependability you trust from Crysteel.

With Superior Versatility, Eight models are available with up to 14 ton lifting capacity. This wide range of models covers every trailer need.

Add Crysteel's Superior Warranty--3 year coverage, the industry maximum! In addition with Colt Trailer Hoists, you'll receive an application recommendation before your purchase to ensure the hoist you install will perform at its best.

Standard Features :

Eight Models Fit All Your Trailer Needs!
Powder Coated Hoist Frame
3 Year Warranty
Designed and Tested Specifically for Dump Trailer Applications
Chrome Cylinder Shafts
All Hoists have Double Acting Capacity
Push Button Control Pre-Wired into Pump
Trailer Safety Prop
Fully Greasable at every Pivot Point

Colt Trailer Hoists are designed and tested specifically for dump trailer applications	Double Acting cylinders with chrome plated shafts deliver superior quality
Powder-coated hoist frames deliver dependability with our rugged design

Colt Hoist Capacity for 45 degree Dump Angle (in tons)
Hoist Model & Overhang
Body Length	TB10DP	TB-8	TB-10	TB-12	TB-14	TB-16	TB-18	TB-20
Body Length	12"	18"	18"	18"	24"	24"	24"	18"
8'	8.6	4.5
9'	7.4	3.8	8
10	6.5	3.2	6.8	10.9	16.7
12'	5.2		5.3	8.5	12.5
14'			4.3	6.9	10	12.8
16'					8.3	11.7	14.3
18'						10.8	12.3	13.2
20'								11.7
22'								10.4
24'								9.4
Capacity based on water-level load Caution: The combined weights of trailer frame and body, hoist and load must not exceed the gross weight rating of any component.

Colt Hoist Specifications (for 45 degree Dump Angle)
	TB10DP	TB-8	TB-10	TB-12	TB-14	TB-16	TB-18	TB-20
Class		A	B	C	D	E	E	F
Hoist Type	Direct Push	Scissors
Mounting Height (In.)	5	5.25	6.5	7	7	7.75	8	8
*Min. Vertical Height (In.)**	n/a	5	8	8	8.5	9	11	11
"M" Dimension (In.)**	n/a	51.5	79	77.25	96.75	90.25	100	128
Max Hydraulic Flow Rate (GPM)	3	3	4	6	6	9	9	9
Max "Up" Pressure (PSI)	3200
Max "Down" Pressure (PSI)	1500					1000
Cylinder Bore & Stroke (In.)	3.75x28	3.5x10	4x16	5x16	5x21	6x19	6x23	6x29
Chromes Cyl. Shaft Diameter (In.)	1.15	1.5	2	2	2.25	2.5	2.5	2.75
Approx Weight (lbs)	131	205	305	340	415	670	750	855
* Minimum Vertical Height is the distance between rear hinge pivot to floor ** "M" Dimension is the distance between the rear hinge pivot and the lower crosstube of the hoist in a standard mounting position.

Equipment Manuals:

Colt Direct Push Hoist, effective 1/1/03

Colt Scissor Hoist (Models TB8-14), effective 8/1/06

Colt Scissor Hoist (Models TB16-20), effective 8/1/06

Colt Scissor Hoist Electric Model Pump, effective 8/1/06

To view Product Literature, click below:

Adobe Reader required to view brochure. Left-click to view with your browser.
Right-click to download the file to your hard drive.