| |
 Pitman Polecat M Series Digger Derrick
| Models |
Sheave Height |
Capacity @ 10' |
| M42H |
42' 2" |
13,400 |
| M45H |
45' 1" |
12,600 |
| M47H |
47' 0" |
12,250 |
| M50H |
49' 10" |
12,450 |
Standard Features:
 Cornermount, centermount or rearmount configurations. Rearmount includes optional turret-mounted rider seat. - Full pressure hydraulic controls.
- High-tensile steel used throughout the unit to provide a high strength-to-weight ratio.
- Two-stage hydraulic-powered steel boom, capacities up to 32,000 lbs.
- 375o non-continuous rotation. Planetary drive gearbox with motion control valve.
- Holding valve protection on all hydraulic cyclinders.
- One set of A-frame outriggers with swiveling foot pads, individual controls and isolation kit (cornermount units supplied with one telescopic swing-out and one telescopic fixed outrigger).
- Foot throttle at operator's station.
Options & Accessories:
- Steel or fiberglass 3rd boom, manual or hyraulic extension.
- Fiberglass boom tip.
- Single, 2-speed and 2-speed shift on demand auger drives, RH or LH mounting, with side load protection.
- Swing-out control console for 180o actuation and raise and lower feature.
- The QuadCommandTM single lever control for rearmount rider's seat.
- Tilting pole claw assembly, 2nd stage, or transferable to 3rd stage. When installed on hydraulic-powered 3rd boom, includes auto-tilt system.
- 12,000 lb. or 15,000 lb. planetary or worm gear turrent winch, or 12,000 lb. worm gear boom tip winch with side load protection.
- Manually articulated transformer handling jib, 4-ft. to 10-ft.
- Platforms (1 or 2) at the boom tip; controls at the boom tip.
- Continuous rotation.
- Hydraulic overload protection system.
- Digger and auger stow mechanism with hydraulic-powered latch.
 Additional outriggers and controls when required. - Hydraulic outlets for tools and accessories.
Optional Equipment:
- Steel or Fiberglass 3rd Boom
- Manual or Hydraulic Extension
- Fiberglass Boom Tip
- Single, 2-Speed, and 2-Speed Shift on Demand
- Swing Out Control Console
- Quad Command Single Lever Control
- Tilting and Transferable Pole Claws
- Planetary or Worm Gear Winches
- Articulating Transformer Jibs to 10’
- Platforms at the Boom Tip
- Top Controls at Boom Tip
- Continuous Planetary Rotation
- Hydraulic Overload Protection
- Digger Stow and Transfer Protection
- Additional Outriggers
- Hydraulic Tool Outlets
- Radio Remote Controls
- Other Options – Consult Factory
Range Chart Dimensions
| Model |
A |
B |
C |
D |
E |
F |
G |
H |
I |
J |
K |
L |
M |
| M42 |
15'-6" |
23'-7" |
32'-4" |
25' |
33'-6" |
42'-2" |
11' |
+80 |
-20 |
12'-8" |
21'-4" |
10'-11" |
19' |
| M45 |
18' |
26'-4" |
35'-4" |
27'-6" |
36'-3" |
45'-1" |
11' |
+80 |
-20 |
15'-3" |
24' |
13'-4" |
21'-7" |
| M47 |
18' |
27'-4" |
37'-4" |
27'-6" |
37'-3" |
47' |
11' |
+80 |
-20 |
15'-3" |
25' |
13'-4" |
22'-7" |
| M50 |
18' |
28'-8" |
40'-2" |
27'-6" |
38'-5" |
49'-10" |
11' |
+80 |
-20 |
15'-3" |
26'-6" |
13'-4" |
23'-11" |
To view Product Literature, click below:
|
|
