Choose Your Language
Versalift East - Bucket Trucks and Aerial Lifts
Welcome to Versalift East - Bucket Trucks and Aerial Lift Trucks
Search the Versalift East Website for:
  Versalift Bucket Trucks

Highway HH Hydraulic Pressure Diggers

Pressure Drill

"HH" Hydraulic Pressure Drill

The model "HH" has a direct input into the final drive ring gear, eliminating all right angle drive gear assemblies. This gives the customer a digger with less moving parts to maintain.

  • Hydraulic drive, hydraulic bar
  • Gas or diesel auxiliary engine
  • Infinitely variable hydraulic motor
  • 3" kelly bar design
  • 16" ring gear
  • Torque's to 22,000 ft./lbs.
  • Digging depths to 25 feet
  • Fixed, spotter or swing bases
  • Mounts on single or tandem axle carrier. (specialty carriers available)

AUXILIARY ENGINE: (STANDARD)

  • John Deere 4045T, Balanced diesel engine 100 HP
  • OPTIONAL: Highway will work with the following companies:
    • CATERPILLAR
    • CUMMINS
    • DETROIT
    • DEUTZ
    • FORD
    • PERKINS
  • *Consult factory for models available.

DIGGER DRIVE:

  • Sundstrand 90 series pump.
  • Poclain variable speed motor.

FUEL SOURCE: (STANDARD)

  • Fuel supplied by chassis fuel tank (diesel/ diesel)
  • OPTIONAL: 50 Gallon fuel tank with mechanical gauge.

TORQUE & R.P.M.: (STANDARD)

  • 0-98 RPM
  • 22,600 ft./lbs. (Maximum)

KELLY BAR:

  • 3" solid square bar with rounded corners.
  • 4140 tool steel, heat treated
  • 1 1/8" auger pin hole.

AUGER CAPACITY:

  • 54" Intermittent
  • 36" Continuous

HOLE DEPTHS: (STANDARD)

  • 10'
  • OPTIONAL: Up to 25'
  • NOTE: all dig depths are based on a 38" chassis frame height and 36" long auger.

FINAL DRIVE:

  • Special design pinion with a 16" ring gear.
  • Steel carrier with replaceable bronze thrust plates and remote bar seals.

HYDRAULIC SYSTEM:

  • 100 G.P.M. tandem gear pump.
  • 2,100 P.S.I. main system pressure.
  • 115 gallon oil reservoir
  • In tank suction strainers
  • In tank return filter
  • Hydraulic oil cooler

BOOM LEVELING: (STANDARD)

  • 20 DEGREES LEFT
  • 45 DEGREES RIGHT
  • 15 DEGREES OVER VERTICAL

*Options available consult factory for special applications.

TURNTABLE BASE: (STANDARD)

  • 95" diameter, 4" ship & car channel rolled ring.
  • 240 degree rotation
  • 120 series chain run threw hydraulic speed reducer.

OPTIONAL:

  • #1. 35 Degree Pivot base. 100" travel with 36" slide.
  • #2. Fixed base

OUTRIGGERS: (STANDARD)

  • Rear "A" frame

OPTIONAL:

  • Straight down jacks on rear corners
  • Two sets of "A" Frame outriggers
  • Spring lockouts
  • Out & down front outriggers

PIVOT BASE:

  • Constructed of 6" Wide flange I-beam 25 lbs./ft.
  • Full length greasable main frame guides.

MAIN FRAME:

  • Constructed of 6" Wide flange I-beam 25 lbs./ft.
  • 36 inches of In/Out slide travel.

DERRICK:

  • 4 3/4"I.D.X 5 1/4" O.D. seamless hydraulic honed tubing
  • 35,400 ft./lbs. Crowd force. Maximum
  • 22,900 ft./lbs. Retract force. Maximum

MAST:

  • 6"X 6"X 1/4" Square tubing

TELESCOPING DERRICK: (OPTIONAL)

  • #1. 6' Telescoping derrick
  • #2. 9' Telescoping derrick

POLE GUIDES: (OPTIONAL)

  • #1. Mechanical linkage fixed pole guides with side rollers.
  • #2. Mechanical linkage tilting pole guides with side rollers

WINCH: (OPTIONAL)

  • Planetary winch 10,000 lb. On first wrap.
  • 125' of 7/16" wire rope

OIL TANK:

  • 115 Gallon hydraulic reservoir with baffles & suction strainers.
  • *Location can be altered, consult factory.

DIGGER WEIGHT:

  • Base weight digger only 12,000 lbs. (Approx.)

CHASSIS OR CARRIER:

  • 84" Cab to Axle minimum
  • 25,500 GVW Single axle minimum

OTHER OPTIONS:

Paint colors, Hydraulic tool circuits, Water tanks, Auger storage, Tunnel storage, Tool boxes, Trailer hitches, Panel lights, Work lights, Safety lighting, Grounding systems, Auger adapters & extension, Augers, Tooling, Hydraulic tools, Outrigger pads, Wheel chocks.


Why the Highway HH?

1. Compact design means it can be mounted on  nearly any chassis with a GVW of 25,500 lbs. and up.

2. Remote bar seals reduce the amount of dirt exposed to the bar packings and assures straight alignment into the seals.

3. Steel main carrier with replaceable thrust plates for less maintenance costs.

4. Heavy duty pivot base and main frame provide long machine life without breaking or bending.

5. More options and custom configurations available than the  competition.

 

 
Utility Equipment Partners