Bucket Trucks

Cranes

Digger Derricks

Dump Bodies

Lift Gates

Platform Lifts

Sign Cranes

Tracked Vehicles

Trailers

Truck Bodies

Used Equipment

Rental / Leasing

Repair / Testing

Training

Paint Shop

Parts

Online Store

Contact Us
Financing
About Us
Directions/Travel
Employment
Industry News
Useful Links
 

Stamm Signalier ATR-41-N

Stamm Manufacturing announces a new design of its Signalier product as a result of innovative engineering that expands functionality and purpose to include an articulating arm telescoping boom and rotational aluminum platform. This unique design of the articulating arm provides for extension to ground contact actuation and the telescoping boom provides for a maximum 41 ft working height. The 3x5 ft. aluminum bucket platform has lateral rotation and vertical tilt positioning flexibility. The platform also has a swing open lock gate for easy access and is rated with at 500 lbs loading capacity. This model is mounted on a 141in. WB- 60in. CA-17,500 GVW F550 or equal. The pictures demonstrate some of this new products features.

GENERAL SPECIFICATIONS

 ATR –41–I  SIGNALIER

This section describes each of the ATR-41-I major (standard) components.

PLATFORM – 36” x  60” inside diameter with 24” door. Constructed of  1 ½” aluminum pipe schedule 40 bent at 6” radius for corner strength.  Floor is aluminum diamond plate 3/16” with 4” kick plate.

 PERSONNEL RESTRAINT SYSTEM – A safety belt or harness and a lanyard are provided.  The anchor for the lanyard is attached to the upper platform support.

 INDIVIDUAL LOWER CONTROLS – Individual full-pressured controls at the turret actuate all boom functions.  An emergency stop and a tool selector control are located at the upper controls.  The lower control station is equipped with a selector valve to override the upper controls.

 SINGLE STICK UPPER CONTROL – The full-pressure single-stick upper control includes a safety trigger to prevent inadvertent operation.  The lift movements correspond with control handle movements.

 HYDRAULIC PLATFORM ROTATOR – A hydraulic platform rotator, operated by a control lever, rotates the platform 180 degrees from one side of the outer/inner boom assembly, across the end-hung position, to the other side of the outer/inner boom assembly.

 HYDRAULIC PLATFORM LEVELING – A master and slave cylinder controls platform leveling.  The leveling system can be operated from the upper controls to adjust platform leveling, tilt the platform.

 OUTER/INNER BOOM ASSEMBLY – The outer/inner boom assembly includes an outer boom, telescopic inner boom, extension system, and hose assemblies.  The outer boom consists of an 8 in. x 10 in. (203 mm x 254 mm) rectangular steel section and a 9 in. x 11 in. (229 mm x 279 mm) fiberglass section (Electrogard) to maintain a 38 in. (0.97 m) insulation gap with the inner boom is fully retracted.  The 6-7/8  in. x 8-7/8 in. (165 mm x 216 mm) rectangular fiberglass inner boom is housed within the outer boom.  The inner boom can be easily removed and disassembled for service and inspection.  The extension system consists of a hydraulic cylinder, two integral holding valves, and dual #50 roller chains housed entirely within the boom assembly.  The hoses routed through the outer/inner boom assembly are fully contained within the boom assembly.

 The outer/inner boom assembly articulates from 25 degrees below horizontal to 85 degrees above horizontal.  Actuated by a double acting cylinder that has two, integral holding valves, the outer/inner boom assembly is offset to one side to provide easy access to the platform.  A boom support cradle and a boom tie down strap are included.

 LOWER BOOM – Each end of a high strength fiberglass insert (chassis insulating system) is installed over a rectangular  8 in. x 10 in. (203 mm x 254 mm) high strength steel section. The steel maintains  the 12 in. (305 mm) insulation gap in all the boom positions.  The double acting cylinder, with an integral holding valve, allows the lower boom to articulate from horizontal to 80 degrees above horizontal.  The lower boom encloses a parallelogram linkage to maintain the knuckle at a constant angle to the turret.

 CYLINDERS – Both the upper and lower cylinders are a threaded head-cap design.  The upper cylinder is equipped with two integral holding valves that prevent down creep and to lock the booms in position in the event of hose failure.  The lower cylinder is equipped with one integral holding valve.

TURRET – The turret wings are designed for strength and rigidity.  The bearing cover is continuously welded to seal out moisture and prevent foreign materials from obstructing the turret rotation.  The turret plate is machined to provide a flat surface to support the rotation bearing.

 CONTINUOUS ROTATION – Unrestricted rotation is accomplished by a hydraulically driven worm and spur gear with a shear ball rotation bearing.  The critical bolts holding the lift to the rotation bearing and the rotation bearing to the pedestal are hex head capscrews.  These critical bolts are torque seal marked to provide a quick means of detecting any turning of the bolt upon inspection.  The eccentric ring backlash adjustment (gearbox pinion adjustment) is described in the “Adjustment” Section of the Service Manual.  Also refer to drawing in the “Adjustment” section to set gear backlash.

 LUBRICATION – Non-lube bearings are used at most points of motion.  The rotation bearing and extension chain require periodic lubrication.

 PEDESTAL – The pedestal is tubular with reinforced mounting plate.  The top plate of the pedestal is 1-1/4 in. (32 mm) thick and machined flat to support the rotation bearing.

 HYDRAULIC OIL RESERVOIR – A 17 gallon (64.41) hydraulic oil reservoir is built integral to the pedestal.  The reservoir includes anti-splash baffles and two sight gauges for quick hydraulic fluid level checks.

 HYDRAULIC SYSTEM – The open-center hydraulic operates at 2700 psi (176 kg/cm2) at 6 gpm (22.7 lpm).  A 10-micron return line filter, mounted above the hydraulic oil level and inside the pedestal, can be easily changed without draining the reservoir.  The 100 mesh (149 micron) suction strainer in the reservoir can be removed for cleaning.  A gate valve, located below the reservoir, prevents oil loss when the pump is serviced.  A magnetic drain plug attracts metal particles from the oil.

 PAINT – The complete unit is primed and painted prior to assembly. Safety yellow or Bell white enamel paint is standard.

 HOSES AND FITTINGS – The hoses routed through the booms are high pressure and nonconductive with swaged hose end fittings.  Retainers separate the hoses inside the booms to prevent chafing and nylon sleeves are installed over hoses at points of movement.  Reusable fittings can be installed if a hose is damaged.

 MASTER CONTROL – The master control energizes the upper and lower control circuits, including engine start/stop and optional two-speed throttle control.

 ENGINE START/STOP – The start/stop circuit has been designed so the lift cannot be operated unless the truck ignition switch is in the “RUN” position and the master control is activated.  This feature makes it difficult for unauthorized individuals to operate the lift when the truck is locked.  An air cylinder at the upper controls and a toggle switch at the pedestal energize this system.

 HYDRAULIC TOOL CIRCUIT AT THE PLATFORM – This system uses open center hydraulic tools.  The tool circuit provides 6 gpm at 2700 psi.

 ELECTRICAL INSULATION SPECIFICATIONS – The outer/inner boom assembly is tested and certified for electrical work at 46 KV and below in accordance with ANSI A92.2 – 1990 requirements. The outer/inner boom assembly is fully insulated even in a retracted position. The chassis insulating system (lower boom insert) is also tested according to ANSI A92.2 – 1990.

 MANUALS – Two operator’s manuals and two service manuals are included with each aerial lift.

 INDEPENDENT OUTRIGGERS – H-frame outriggers are shear-plate mounted to the frame and are equipped with pilot operated check valves, internal thermal relief valves, and separate controls.

At maximum extension, the outriggers furnish 96-in. (3.05 m) of spread and 9 in. (229 mm) of penetration.  They have 17 in. (432 mm) of ground clearance based on 36-in. (0.91 m) or 31 in. (0.79 m) frame height.

 PIVOTING OUTRIGGER FEET – Pivoting outrigger feet swivel 12 degree angle about a horizontal centerline.

 OUTRIGGER/BOOM INTERLOCK SYSTEM (optional) – The outrigger/boom interlock system prevents lift operation until the outriggers contact the ground and outrigger retraction before the aerial lift is properly stored.

 EMERGENCY POWER (standard) – The emergency hydraulic pump is driven by a DC motor, which is powered by the truck-engine battery.  The system is connected in parallel with the main pump and is designed for non-continuous operation.  An air cylinder at the upper controls and a toggle switch at the pedestal are used to energize the system.

 SET OF TOOL POWER PORTS (standard) – A set of power ports are installed at the platform to accommodate an open center tool.

 TOOL POWER AT THE GROUND CONTROLS (optional) – The hydraulic tools must be open-center and operate satisfactorily at 2500 psi (176 kg/cm2) and 6 gpm (22.7 lpm).

 LEVELING CONTROL AT THE TURRET – A valve section is added to the lower control station for platform leveling.  In addition to the control at the platform, the leveling control at the turret can be activated to tilt the platform for cleanout or to ease the removal of an injured operator.

 BODY – Standard recommended 9’ service body with a 4’ rear floor extension. Aluminum tread plate on top of compartments and standard shelving. Access step at rear.

ATR-41-I SIGNALIER

DIMENSIONAL SPECIFICATIONS

GENERAL SPECIFICATIONS -       Based on 36 in (0.91 m) Frame Height

Horizontal Reach………………………………………………………………………28 ft.

Standard Platform Capacity…………………………………………………………..500 lbs.

                Height to Bottom of Platform…………………………………………………36 ft

                Working Height………………………………………………………………..41 ft

                Stowed Travel Height……………………………………………………under 9 ft 10 in (3.00m)

                Weight of Lift…………………………………………………………………..3,500 lbs. (1590 kg)

Hydraulic System

                Operating Pressure……………………………………………………………..2700 psi

                Flow Rate………………………………………………………………………6 gpm

                Filtration……………………………………………………………………….10 micron Return

                …………………………………………………………………………………100 mesh Suction

                System Type……………………………………………………………………Open Center

                Power Source…………………......................……………...PTO Pump or Clutch Pump

ATR-41-I SIGNALIER

VEHICLE SPECIFICATIONS 

Recommended Cab to Rear Axle Dimension………………………………..60 in.(1.52 m)

Frame Section Modulus……………………………………………………….10.1 in3 (166 cm)

Frame Resisting Bending Moment……………………………………………727,200 in-lbs.(82165N/m)

 With Outriggers:

                Axle Ratings                                        Recommended                          Minimum

                GVWR…………………………….21,500 lbs. (9753 kg)……………..17,500 lbs.

                GAWR (Front)……………………8,000 lbs. (3630 kg)………………6,000 lbs.

                GAWR (Rear)…………………….15,000 lbs. (6805 kg)…………….. 12,000 lbs.  

               Approximate Weight for Stability…………………………………….. 11,500 lbs.

Notes:  Actual GVWR and GAWRs should be based on the weight and weight distribution of the chassis, body, lift, ballast (if required), accessories, and the desired payload.

Curb weight of the unit will vary based on rated platform capacity, mounting configuration, frame stiffness, and stability test requirements.