| |
 2RT122-6K
2 Reel Trailer
 |
 |
click images for larger view |
 View Printer Friendly Specs for the 2RT122-6K Reel Trailer
Adobe Reader required to view brochure. Left-click to view with your browser.
Right-click to download the file to your hard drive.
| CAPACITY |
- 14,000 lbs. GVWR - Calculated at 15% Weight Transfer to Tow Vehicle
- 10,500 lbs. Load Capacity
|
| DIMENSIONS |
- Overall Length: 17’
- A-Frame: 5’
- Cargo Bed: 12’L x 72”W x 15”H
- Overall Width: 101”
- Reel Size: (2) two x 72”D x 60”W x 3” Center Hole
|
| AXLES |
- 6000 lbs. Tandem Dexter Torflex Axles - (Optional Axles: 7000 lb. & 8000 lb.)
- 12” x 2” Electric Brakes on All Wheels
- (4) four - LT235/85R16 LR-E Tires, Capacity 3,042 lbs. each, Single Wheel Application
- (4) four - 16” x 6” Single Wheels (8 Hole on 6 1/2" Bolt Circle)
- (1) Pair - Mud Flaps
|
| REEL RACKS |
- (2) two - Fixed with Heavy Duty Bronze Bearings, Retainer Cap, Pull Pin & Spring Clip
- (2) two - 2 7/8” Reel Bars with Crossarm and (1) Locking Collar
|
| TONGUE, HITCH & JACK |
- 5” x 3” Tubular Steel A-Frame
- 6-Position Adjustable Hitch Plate (14” through 27”)
- 2 1/2" Lunette Eye, 35000 lbs. Capacity
- 3/8” x 36”L Galvanized Safety Chains with Safety Hooks and Anchor Shackles
- Fixed Binkley, Model 48000 Drop Leg Jack, 12,000 lb. Static Load Capacity
|
| MAIN FRAME |
- 5” x 3” Tubular Steel Main Frame
- 5” x 3 “ Tubular Steel Crossmembers at Front of Cargo Bed
- 6” x 3 “ Tubular Steel Crossmembers at Rear of Cargo Bed
|
| CARGO BED |
- 12 Gauge Smooth Steel Floor
- 3” C-Channel & 3” Angle Crossmembers on 24” Centers
- Sides - 12 Gauge Steel with 3”x3” Tubular Steel Top Rail & 5”x3” Lower Rail
- 12”H x 2”W Vertical Guide Slots for Drop-in 2”W Lumber for Removable Tailgate
|
| CAT WALK |
- 1/8” Steel Diamond Tread, Mounted on 4”x2” Tubular Perimeter Frame
- Full Length of Cargo Bed, Fore and Aft of Fenders
|
| FENDERS |
- Fabricated 1/8” Steel Diamond Tread Plate Fenders
- Integrated Construction with Cat Walks
|
| TOOL BOX |
 Tool Box Dimensions: 14”H x 13”D x 78” Contoured to A-Frame- Fabricated 1/8” Smooth Steel Intergraded Construction
- Lift-Up Lid with Security Hasp for Padlock
|
| 12 VOLT WIRING SYSTEM |
- ICC & DOT Approved Lights
- Sealed Beam Rubber Mounted Stop, Turn, Tail and Marker Lights
- S.O. Cable Wiring Loom, Clamped on 16” Centers with Rubber Lined Clamps
- Wiring Loom Terminated in Junction Boxes
- Connections Soldered and Sealed with Heat Shrink Tubing
- 32” Pigtail w/ 6-Way Aluminum Die Cast Plug, Terminated at Junction Box
- Breakaway Kit with Sealed Lead Acid Battery & Trickle Charger
|
| PAINT |
- Trailer is Completely Sandblasted
- Seams are Sealed with Paintable Caulk
- Rust Prohibitive Two-Part Epoxy Polyamide Primer
- Two-Part Acrylic Polyurethane Topcoats (Standard Colors White and Safety Yellow)
- All Attachments Painted before Assembly and Installed with Serviceable Fasteners
|
Options
| AXLES |
- 3500 lbs. Tandem – Payload 4,500 lbs. GVWR 8,000 lbs.
10” x 2 1/4” Electric Brakes
(4) four - ST225/75R15 LR-D, Capacity 2,540 lbs
- 7000 lb. Tandem – Payload: 12,300 lbs. GVWR 16,000 lbs.
12” x 2” Electric Brakes
(4) four - ST235/80R16 LR-E, (10 Ply) Capacity 3,520 lbs.
- 8000 lb. Tandem – Payload: 14,800 lbs. GVWR 18,400 lbs.
12 1/4" x 3 3/8” Electric Brakes(4) four - 215/75R/17.5 LR-H, Capacity 4,805 lbs.
|
| OPTIONAL SPARE TIRE & WHEEL |
- ST225/75R15 LR-D (3.5K Axle)
- LT235/85R16 LR-E (6K Axle)
- ST235/80R16 LR-E (7K Axle)
- 215/75R/17.5 LR-H (8K Axle)
- Wheel Chock Holders, with Rubber Wheel Chocks (7”H x 10”L x 8”W) pair
|
| REEL RACKS |
- 96” Reel Diameter in Lieu of 84”
- Additional Reel Rack Idler Assembly
(1) Fixed Reel Stands with Bronze Bushings and Retainer Cap with Pull Pin and Spring Clip
(1) Removable 2 7/8” Reel Bars with Crossarm and (1) Locking Collar
- 12” Tension Brake Package (in Lieu of “Idler” Assembly)
(1) 12” Medium Duty Tension Brakes w/ 12”D x 5/8” Solid Bronze Disc
Cast Steel Caliper with Tension Adjusting Handle
(1) Removable 2 7/8” Reel Bars with Crossarm and (1) Locking Collar
Heavy Duty Bronze Bearings with Retainer Cap, Pull Pin and Spring Clip
- 16” Tension Brake Package (in Lieu of “Idler” Assembly)
(1) 16” Tension Brakes w/ 16”D x 3/4” Solid Bronze Disc
Cast Steel Caliper with Tension Adjusting Handle
(1) Removable 2 7/8” Reel Bars with Crossarm and (1) Locking Collar
Heavy Duty Bronze Bearings with Retainer Cap, Pull Pin and Spring Clip
|
| TONGUE, HITCH & JACK |
- 3” Lunette Eye (In Lieu of 2 1/2" Eye)
- Visible Registration Holder
|
| CARGO BED |
 1 1/2" x 6# Galvanized Expanded Metal Floor- Galvanized Grip Strut Cat Walks
- Safety Cone Holder
- Additional D-Rings
- Rear, Drop Leg Stabilizing Jacks
|
| WIRING OPTIONS |
- Warner 6-Way Connector
in Lieu of Standard 6-Way Connector
- Solar Charged Breakaway Kit in Lieu of Standard Kit
|
|
|
