| |
 3RT222-6K
3 Reel Trailer
 |
 |
click images for larger view |
 View Printer Friendly Specs for the 3RT222-6K Reel Trailer
Adobe Reader required to view brochure. Left-click to view with your browser.
Right-click to download the file to your hard drive.
| CAPACITY |
-
14,000 lbs. GVWR - Calculated at 15% Weight Transfer to Tow Vehicle
- 10,000 lbs. Load Capacity
|
| DIMENSIONS |
- Overall Length: 27’
- A-Frame: 5’
- Cargo Bed: 22’6”L x 72”W x 15”H
- Overall Width: 101”
- Reel Size: (3) three x 84”D x 60”W x 3” Center Hole
|
| AXLES |
- 6000 lbs. Tandem Dexter Torflex Axles - (Optional Axles: 7000 lb. & 8000 lb.)
- 12” x 2” Electric Brakes on All Wheels
- (4) four - LT235/85R16 LR-E Tires, Capacity 3,042 lbs. each, Single Wheel Application
- (4) four - 16” x 6” Single Wheels (8 Hole on 6 1/2" Bolt Circle)
- (1) Pair - Mud Flaps
|
| REEL RACKS |
- (3) three - Fixed w/ Heavy Duty Bronze Bearings, Retainer Cap, Pull Pin & Spring Clip
- (3) three - 2 7/8” Reel Bar with Crossarm and (1) Locking Collar
|
| TONGUE, HITCH & JACK |
- 5” x 3” Tubular Steel A-Frame
- 6-Position Adjustable Hitch Plate (14” through 27”)
- 2 1/2" Lunette Eye, 35000 lbs. Capacity
- 3/8” x 36”L Galvanized Safety Chains with Safety Hooks and Anchor Shackles
- Fixed Binkley, Model 48000 Drop Leg Jack, 12,000 lb. Static Load Capacity
|
| MAIN FRAME |
- 5” x 3” Tubular Steel Main Frame
- 5” x 3 “ Tubular Steel Crossmembers at Front of Cargo Bed
- 6” x 3 “ Tubular Steel Crossmembers at Rear of Cargo Bed
|
| CARGO BED |
- 12 Gauge Smooth Steel Floor
- 3” C-Channel & 3” Angle Crossmembers on 24” Centers
- Sides - 12 Gauge Steel with 3”x3” Tubular Steel Top Rail & 5”x3” Lower Rail
- 12”H x 2”W Vertical Guide Slots for Drop-in 2”W Lumber for Removable Tailgate
|
| CAT WALK |
- 1/8” Steel Diamond Tread, Mounted on 4”x2” Tubular Perimeter Frame
- Full Length of Cargo Bed, Fore and Aft of Fenders
|
| FENDERS |
- Fabricated 1/8” Steel Diamond Tread Plate Fenders
- Integrated Construction with Cat Walks
|
| TOOL BOX |
- Tool Box Dimensions: 14”H x 13”D x 78” Contoured to A-Frame
- Fabricated 1/8” Smooth Steel Intergraded Construction
- Lift-Up Lid with Security Hasp for Padlock
|
| 12 VOLT WIRING SYSTEM |
- ICC & DOT Approved Lights
- Sealed Beam Rubber Mounted Stop, Turn, Tail and Marker Lights
- S.O. Cable Wiring Loom, Clamped on 16” Centers with Rubber Lined Clamps
- Wiring Loom Terminated in Junction Boxes
- Connections Soldered and Sealed with Heat Shrink Tubing
- 32” Pigtail w/ 6-Way Aluminum Die Cast Plug, Terminated at Junction Box
- Breakaway Kit with Sealed Lead Acid Battery & Trickle Charger
|
| PAINT |
- Trailer is Completely Sandblasted
- Seams are Sealed with Paintable Caulk
- Rust Prohibitive Two-Part Epoxy Polyamide Primer
- Two-Part Acrylic Polyurethane Topcoats (Standard Colors White and Safety Yellow)
- All Attachments Painted before Assembly and Installed with Serviceable Fasteners
|
Options
| AXLES |
- 7000 lb. Tandem – Payload: 12,300 lbs. GVWR 16,000 lbs.
12” x 2” Electric Brakes
(4) four - ST235/80R16 LR-E, (10 Ply) Capacity 3,520 lbs.
- 8000 lb. Tandem – Payload: 14,800 lbs. GVWR 18,400 lbs.
12 1/4" x 3 3/8” Electric Brakes(4) four - 215/75R/17.5 LR-H, Capacity 4,805 lbs.
|
| OPTIONAL SPARE TIRE & WHEEL |
- LT235/85R16 LR-E (6K Axle)
- ST235/80R16 LR-E (7K Axle)
- 215/75R/17.5 LR-H (8K Axle)
- Wheel Chock Holders, with Rubber Wheel Chocks (7”H x 10”L x 8”W) pair
|
| REEL RACKS |
- 96” Reel Diameter in Lieu of 84”
- Additional Reel Rack Idler Assembly
(1) Fixed Reel Stands with Bronze Bushings and Retainer Cap with Pull Pin and Spring Clip
(1) Removable 2 7/8” Reel Bars with Crossarm and (1) Locking Collar
- 12” Tension Brake Package (in Lieu of “Idler” Assembly)
(1) 12” Medium Duty Tension Brakes w/ 12”D x 5/8” Solid Bronze Disc
Cast Steel Caliper with Tension Adjusting Handle
(1) Removable 2 7/8” Reel Bars with Crossarm and (1) Locking Collar
Heavy Duty Bronze Bearings with Retainer Cap, Pull Pin and Spring Clip
 16” Tension Brake Package (in Lieu of “Idler” Assembly)
(1) 16” Tension Brakes w/ 16”D x 3/4” Solid Bronze Disc
Cast Steel Caliper with Tension Adjusting Handle
(1) Removable 2 7/8” Reel Bars with Crossarm and (1) Locking Collar
Heavy Duty Bronze Bearings with Retainer Cap, Pull Pin and Spring Clip
|
| TONGUE, HITCH & JACK |
- 3” Lunette Eye (In Lieu of 2 1/2" Eye)
- Visible Registration Holder
|
| CARGO BED |
 1 1/2" x 6# Galvanized Expanded Metal Floor- Galvanized Grip Strut Cat Walks
- Safety Cone Holder
- Additional D-Rings
- Rear, Drop Leg Stabilizing Jacks
|
| WIRING OPTIONS |
- Warner 6-Way Connector
in Lieu of Standard 6-Way Connector
- Solar Charged Breakaway Kit in Lieu of Standard Kit
|
|
|
