| |
Brooks Brothers PTB111-9K Utility Single Axle Pole Trailer
View Printer Friendly Specs for the PTB111-9K Utility Single Axle Pole Trailer
Adobe Reader required to view brochure. Left-click to view with your browser.
Right-click to download the file to your hard drive.
| MODEL: |
PTB111-9K |
| CAPACITY |
- 10,500 lbs. GVWR - Calculated at 15% Weight Transfer to Tow Vehicle
- 7,500 lbs. Load Capacity
|
| DIMENSIONS |
- Length Adjustments: 24’ / 31’ / 38’
- Cargo Bed Optional: 118”L x 39”W x 7”H
- Overall Width: 95”
- Bolster Height: 42”
|
| AXLES |
- 9000 lbs. Single Dexter Straight Axle - (Optional Axles 10K, 12K & 15K)
- Oil Bath Hubs, 8 Studs
- 12 1/4” x 3 3/8” Electric Brakes All Wheels
- 4500 lbs. 6 Leaf Slipper Springs
- Adjustable Spring Pads for Wheel Alignment
- Reinforced Spring Hangers with 3” Structural C-Channel Crossmember
- (4) four - LT235/85R16 LR-E Tires, Capacity 2,778 lbs. each, Dual Wheel Application
- (4) four - 16” x 6” Wheels (8 Hole on 6 1/2" Bolt Circle)
- Pair - Mud Flaps
|
| POLE BOLSTERS |
- Front Bolster: 45”W Fixed (Mounted on Extendable Tongue)
- Center Bolster: 95”W Fixed 5” Double C-Channel Construction with 21” Stanchions
- Rear Bolster: 95”W Fixed 5” Double C-Channel Construction with 21” Stanchions
- Stanchions: (4) four - 21” Lever Lock, Sliding & Removable
- (4) four - Heavy Duty Ratchet Type Winch Binders with Breaker Bar
- (4) four - 15’ L x 4” W x 12000 lbs. Nylon Straps
|
| TONGUE & HITCH |
- 8” x 4 ” x 1/4" Wall Extendable Tongue with Lubricated Steel Wear Pads
- 6-Position Adjustable Hitch Plate
- 2 1/2" Lunette Eye, 35000 lbs. Capacity
- 3/8” x 36”L Galvanized Safety Chains with Safety Hook and Anchor Shackle
|
| A FRAME & JACK |
- 7” Structural C-Channel A-Frame
- Fixed Binkley, Model 48000 Drop Leg Jack, 12,000 lb. Static Load Capacity
|
| MAIN FRAME |
- 7” x 4” Tubular Steel Frame
- 10 ” x 6 ” Receiver Tube
- 7” x 4 “ Tubular Steel Crossmembers Under Rear Bolster
- 3” Structural C-Channel Crossmembers
|
| FENDERS |
- Fabricated 1/8” Steel Diamond Tread Plate Fender Construction
- Reinforced with 3” Structural C-Channel at Front and Rear of Fender
|
| 12 VOLT
WIRING SYSTEM |
- ICC & DOT Approved Lights
- Sealed Beam Rubber Mounted Stop, Turn, Tail and Marker Lights
- S.O. Cable Wiring Loom, Clamped on 16” Centers with Rubber Lined Clamps
- Wiring Loom Terminated in Junction Boxes
- Connections Soldered and Sealed with Heat Shrink Tubing
- Stretch Coil Cord with Retainer on Extendible Tongue
- 32” Pigtail w/ 6-Way Aluminum Die Cast Plug, Terminated at Junction Box
- 6-Way Aluminum Die Cast Plug (Truck Side) in Rear Butt Tube for Light Bar Hook-Up
- Breakaway Kit with Sealed Lead Acid Battery and Trickle Charger
|
| PAINT |
- Trailer is Completely Sandblasted
- Seams are Sealed with Paintable Caulk
- Rust Prohibitive Two-Part Epoxy Polyamide Primer
- Two-Part Acrylic Polyurethane Topcoats (Standard Colors Black and White)
- All Attachments Painted before Assembly and Installed with Serviceable Fasteners
- 2” Red/White Reflective Tape on Both Sides of Trailer
|
Options
| AXLES WITH ELECTRIC BRAKES OPTIONS |
- 10000 lbs. GD – Payload: 8,700 lbs. GVWR 11,700 lbs.
8 Stud Oil Bath Hubs
12 1/4" x 3 3/8” Electric Brakes
(4) four - LT235/85R16 LR-E Tires, Capacity 2,778 lbs. each
(4) four - 8 Hole Dual Wheels
- 10000 lbs. HD – Payload: 8,700 lbs. GVWR 11,700 lbs.
8 Stud Oil Bath Hubs
12 1/4" x 4” Electric Brakes
(4) four - LT235/85R16 LR-E Tires, Capacity 2,778 lbs. each
(4) four - 8 Hole Dual Wheels
- 12000 lbs. – Payload: 11,000 lbs. GVWR 14,100 lbs.
8 Stud Oil Bath Hubs
12 1/4" x 5” Electric Brakes
(4) four - ST235/80R16 LR-E Tires, (14 Ply) Capacity 3,100 lbs. each
(4) four - 8 Hole Dual Wheels
- 15000 lbs. – Payload: 14,000 lbs. GVWR 17,500 lbs.
10 Stud Oil Bath Hubs
12 1/4" x 5” Electric Brakes
(4) four – 215/75R/17.5 LR-H Tires, Capacity 4,540 lbs. each
(4) four - 10 Hole Dual Wheels.
|
| AXLES WITH ABS AIR BRAKES OPTIONS |
- 10000 lbs. HD w/ ABS – Payload: 8,700 lbs. GVWR 11,700 lbs.
8 Stud Oil Bath Hubs
12 1/4" x 4” Spring Brakes, Auto Slack Adjusters
(4) four - LT235/85R16 LR-E Tires, Capacity 2,778 lbs. each
(4) four - 8 Hole Dual Wheels
- 12000 lbs. w/ ABS – Payload: 11,000 lbs. GVWR 14,100 lbs.
8 Stud Oil Bath Hubs
12 1/4" x 5” Spring Brakes, Auto Slack Adjusters
(4) four - ST235/80R16 LR-E Tires, (14 Ply) Capacity 3,100 lbs. each
(4) four - 8 Hole Dual Wheels
- 15000 lbs. w/ ABS – Payload: 14,000 lbs. GVWR 17,500 lbs.
10 Stud Oil Bath Hubs
12 1/4" x 5” Spring Brakes, Auto Slack Adjusters
(4) four – 215/75R/17.5 LR-H Tires, Capacity 4,540 lbs. each
(4) four - 10 Hole Dual Wheels
|
| OPTIONAL SPARE TIRE & WHEEL |
- LT235/85R16 LR-E (9 & 10K Axle)
- ST235/80R16 LR-E (12K Axle)
- 215/75R/17.5 LR-H (15K Axle)
- Wheel Chock Holders, with 7”H x 10”L x 8”W Rubber Wheel Chocks
|
| BOLSTER OPTIONS |
- 64”W Tubular Front Bolster on Extendable Tongue,
Pole Stops, Winch Binder and Nylon Strap (In Lieu of 45” Front Bolster)
- U-Type Single Pole Cradle on Extendable Tongue
Winch Binder and Nylon Strap (In Lieu of 45” Front Bolster)
- 60”W (45” ID) 3” Double C-Channel Bolster,
Winch Binder and Nylon Strap (In Lieu of 45” Front Bolster):
- with 9” Chain Adjusted Stanchions or 21” Lever Lock Stanchions
- (4) - 30' L Nylon Winch Strap in Lieu of 15'
- (4) four - 9” Chain Adjusted Stanchions,
Installed on Center & Rear Bolster In Lieu of 21” Lever Lock Stanchions
|
| HITCH & JACK |
- 3” Lunette Eye (In Lieu of 2 1/2" Eye)
- Visible Registration Holder
- Jack Handle Extension:
- Add to One Side
- Add to Both Sides (Requires Store-Away Handle)
|
| CARGO BED |
- Add 118 ”L x 39”W x 7”H Cargo Bed Floor Between Center and Rear Bolster Expanded Metal Floor or 1/8” Smooth Metal Floor
- Additional D-Rings
- Tool Box 15” Long x 12 1/4" Wide x 10” Deep Mounted in Front of Fender
|
| WIRING & LIGHT BAR |
- Light Bar

(2) Rubber Mounted Sealed Beam Lights (Stop Turn and Tail)
36”L x 4" x 4" Tubular Steel Body
Chain Adjusted Mounting Base
25’ of Cable with 6-Way Aluminum Die Cast Connector
- Warner 6-Way Connector
in Lieu of Standard 6-Way Connector
- Solar Charged Breakaway Kit In Lieu of Standard Kit
|
|
|