| |
 PTU92-6KXL Utility Combination Pole Trailer
 |
 |
click images for larger view |
 View Printer Friendly Specs for the PTU92-6K(XL) Utility Combo Pole Trailer
Adobe Reader required to view brochure. Left-click to view with your browser.
Right-click to download the file to your hard drive.
| CAPACITY |
- 13,500 lbs. GVWR - Calculated at 15% Weight Transfer to Tow Vehicle
- 10,200 lbs. Load Capacity
|
| DIMENSIONS |
- Length Adjustments: 20’ / 25’ / 30’
- Cargo Bed: 9’L x 64”W x 15”H
- Overall Width: 89”
- Bolster Height: 45”
|
| AXLES |
- 6000 lbs. Tandem Dexter Straight Axles - (Optional Axles: 7K & 8K)
- 12” x 2” Electric Brakes All Wheels
- 3500 lbs. 5 Leaf Slipper Springs,
- Reinforced Spring Hangers with 3” Structural C-Channel Crossmenber
- (4) four - LT235/85R16 LR-E Tires, Capacity 3,042 lbs. each, Single Wheel Application
- (4) four - 16” x 6” Single Wheels (8 Hole on 6 1/2" Bolt Circle)
- (1) Pair - Mud Flaps
|
| POLE BOLSTERS |
- Front Bolster: 45”W Fixed (Mounted on Extendable Tongue)
- Center Bolster: 89”W Fixed 3” Double C-Channel with 9” Stanchions
- Rear Bolster: 89”W Removable 3” Double C-Channel with 9” Stanchions
- Stanchions: (4) four - 9” Chain Adjusted Stanchions Sliding & Removable
- (3) three - Heavy Duty Ratchet Type Winch Binders with Breaker Bar
- (3) three - 15’ L x 4” W x 12000 lbs. Nylon Straps
|
| TONGUE, HITCH |
- 6” x 4” x 1/4" Wall Extendable Tongue with Lubricated Steel Wear Pads
- 6-Position Adjustable Hitch Plate
- 2 1/2" Lunette Eye, 35000 lbs. Capacity
- 3/8” x 36”L Galvanized Safety Chains with Safety Hooks and Anchor Shackles
|
| A FRAME & JACK |
- 6” x 2” Tubular Steel A-Frame
- Fixed Binkley, Model 48000 Drop Leg Jack, 12,000 lb. Static Load Capacity
|
| MAIN FRAME |
- 6” x 3” Tubular Steel Main Frame
- 8” x 6” Receiver Tube
- 7” x 3“ Tubular Steel Crossmembers Under Center and Rear Bolsters
- 3” Structural C-Channel Crossmembers on 14 1/2” Centers Under Cargo Bed Floor
|
| CARGO BED |
- Interior Dimensions: 9’L x 64”W x 15”H with Reinforced Fold Down Tailgate
- Floor: 1/8” Smooth Steel Construction
- Sidewalls: 12 Gauge Formed in Brake for Added Strength
- Tailgate: Tubular Construction, w/ Offset Hinges so Debris is Easily Cleared
- (4) four - 5/8” D-Rings, 19,000 lbs. Capacity each, Floor Mounted (1) one each Corner
|
| FENDERS |
- Fabricated 12 Gauge Steel Construction, Integrated with Tool Boxes
|
| TOOLBOXES |
- Tool Boxes Fabricated from 12 Gauge Smooth Steel, Intergraded Construction
- (6) Side Entry Doors with Twist Latches and Key Locks
- (2) Swing up Lids on Top Boxes with Pull Latches and Key Locks
- Top Boxes Equipped with Gas Cylinders
- A-Frame Box: (1) 24”D x 15”H x 88” W
- Side Front Boxes: (2) 22 1/2"L x 12”D x 20 3/4"H
- Side Rear boxes: (2) 16 1/2"L x 12”D x 20 3/4'H
- Top Boxes: (2) 70”L x 12”W x 7”D
- Weather Tight Rubber Gaskets
|
| 12 VOLT
WIRING SYSTEM |
- ICC & DOT Approved Lights
- Sealed Beam Rubber Mounted Stop, Turn, Tail and Marker Lights
- S.O. Cable Wiring Loom, Clamped on 16” Centers with Rubber Lined Clamps
- Wiring Loom Terminated in Junction Boxes
- Connections Soldered and Sealed with Heat Shrink Tubing
- Internal Wiring in Tongue Extension, Receptacle at Each Pin Location
- 32” Pigtail w/ 6-Way Aluminum Die Cast Plug, Terminated at Junction Box
- 6-Way Aluminum Die Cast Plug (Truck Side) in Rear Butt Tube for Light Bar Hook-Up
- Breakaway Kit with Sealed Lead Acid Battery & Trickle Charger
|
| PAINT |
- Trailer is Completely Sandblasted
- Seams are Sealed with Paintable Caulk
- Rust Prohibitive Two-Part Epoxy Polyamide Primer
- Two-Part Acrylic Polyurethane Topcoats (Standard Colors White and Safety Yellow)
- All Attachments Painted before Assembly and Installed with Serviceable Fasteners
|
Options
| AXLES |
- 7000 lb. Tandem – Payload: 12,000 lbs. GVWR 16,000 lbs.
12” x 2” Electric Brakes
(4) four - ST235/80R16 LR-E, (14 Ply) Capacity 3,520 lbs.
- 8000 lb. Tandem – Payload: 14,500 lbs. GVWR 18,400 lbs.
12 1/4" x 3 3/8” Electric Brakes(4) four - 215/75R/17.5 LR-H, Capacity 4,805 lbs.
|
| OPTIONAL SPARE TIRE & WHEEL |
- LT235/85R16 LR-E (6K Axle)
- ST235/80R16 LR-E (7K Axle)
- 215/75R/17.5 LR-H (8K Axle)
- Rubber Wheel Chocks (7”H x 10”L x 8”W) pair
|
| BOLSTER |
-
64”W Tubular Bolster,
Pole Stops, Winch Binder and Nylon Strap (In Lieu of 45” Front Bolster)
-
U-Type Single Pole Cradle
Winch Binder and Nylon Strap (In Lieu of 45” Front Bolster)
-
60”W (45” ID) 3” Double C-Channel Bolster,
Winch Binder and Nylon Strap (In Lieu of 45” Front Bolster):
- with 9” Chain Adjusted Stanchions or 21” Lever Lock Stanchions
(4) - 30' L Nylon Winch Strap in Lieu of 15'
-
(4) four – 21” Lever Lock Stanchions, Sliding and Removable
in Lieu of Standard 9” Chain Adjusted Stanchions
Installed on Center and Rear Bolsters
|
| REMOVABLE REEL RACKS |
(1) pair - 36”H Reel Stands with 3” Receivers Tubes
(Reel Bar Not Included) -
(1) pair – 3” Receiver Tubes Only
-
2 7/8” Reel Bar with (2) Locking Collars
-
Standard Reel Rack Package
(1) pair - 36”H Reel Stands
(1) pair – 3” Receiver Tubes
(1) 2 7/8” Reel Bar with (2) Locking Collars
Maximum Reel Size - 68”D x 50”W x 2,200 lbs. Capacity
-
Reel Rack with HD Bronze Bushings Package
(1) pair - 36”H Reel Stands with Bronze Bushings
(1) pair – 3” Receiver Tubes
(1) 2 7/8” Reel Bar with (1) Crossarm and (1) Locking Collar
Maximum Reel Size – 68”D x 50”W x 2,500 lbs. Capacity
|
| REEL RACKS WITH OVERSPIN / TENSIONING BRAKES |
- 8” Overspin Brake Package
8” Brake w/ 8” x 7/16” Solid Stainless Steel Disc, Cast Aluminum Caliper and Tension Adjusting Handle
(1) pair - 36”H Reel Stands with Bronze Bushings
(1) 2 7/8” Reel Bar with (1) Crossarm and (1) Locking Collar
Maximum Reel Size 68”D x 48”W x 2,500 lbs
- 12” Medium Duty Tensioning Brake Package
12” Tension Brake w/ 12” x 5/8” Solid Bronze Disc, Cast Steel Caliper and Tension Adjusting Handle
(1) pair - 36”H Reel Stands with Heavy Duty Bronze Bearings
(1) 2 7/8” Reel Bar with (1) Crossarm and (1) Locking Collar
Maximum Reel Size 68”D x 48”W x 3,000 lbs
|
| HITCH & JACK |
-
3” Lunette Eye (In Lieu of 2 1/2" Eye)
- Visible Registration Holder
- Jack Handle Extension:
- Add to One Side
- Add to Both Sides (Requires Store-Away Handle)
|
| CARGO BED |
- Additional D-Rings
- Chains on Tailgate
|
| WIRING & LIGHT BAR |
- Light Bar
(2) Rubber Mounted Sealed Beam Lights (Stop Turn and Tail)
36”L x 4" x 4" Tubular Steel Body
Chain Adjusted Mounting Base
25’ of Cable with 6-Way Aluminum Die Cast Connector
- Warner 6-Way Connector
in Lieu of Standard 6-Way Connector
- Solar Charged Breakaway Kit In Lieu of Standard Kit
|
|
|
